Xerox 4090 User Manual

Page 68

Text mode
Original mode

PRINT JOB MAINTENANCE

7. Insert the new bottle into the printer, pushing the bottle well

into the recess.

1. Cartridge handle
2. Paper seal

8. Move the green handle to the latched position to secure the

lid of the cartridge.

9. Slide the cartridge all the way into the printer.

10. Hold the cartridge in place with one hand, and remove the

white paper seal by pulling it toward you with the other
hand. Discard the seal and the drop cloth.

Note: If any dry ink gets on your hands, wash them with soap
and cold water. Heat sets the ink permanently. If any dry ink
gets on your clothes, brush them with a dry paper towel or a
stiff-bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Dry cleaners should be
told that the spot is dry ink for a copy machine so they will not
use a solvent that sets the stain.

5-2

XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE