Xerox 4090 - Manual (Page 150)

METER READING AND REPORTING
Figure B-1. Sample customer billing report
XEROX 4090
CUSTOMER BILLING REPORT
DATE: MM/DD/YY PAGE 1
TIME: HH:MM
CUSTOMER ID:
MACHINE ID:
***************************************************************************************
**** System Configuration ****
Machine Type - 4090
CPU memory = 512K Disk units: 0,1,2,3,floppy
CD/IG: version 4 Tape: dual density
Font memory: 64 megabits Printer characteristics
Online: address 21 - Speed: 92 ppm: duplex
- mode 6 byte, device 3211 - Resolution: 300 spi
Enet addr: XX-00-00-00, *0-000-000-000 - Finisher: 2-tray stacker
- Net address: 00-00, *000 - Default order: 1 to n
Communications interfaces - Paper size: 8.5 x 11 (us Letter)
- 871 CM Language: U.S. English
Terminal Type: ADM-11/LINK MC 2 Graphics with 32 megabits
Graphics Type: GVG
GOOD IMPRESSIONS SUCCESSFULLY DELIVERED:
SHEETS PRINTED IN IOT DIAGNOSTIC MODE:
Machine serial number request
The first time you enter a REPORT command after a full sysgen or
after a system disk has been reformatted, you are prompted for
the 9-character machine serial number.
The number is located on the metal plate inside the front right-
hand door of the printer.
To enter the serial number:
• Enter the product code (the first three characters of the
number). Any alphabetical character must be in uppercase.
• Enter the remaining six digits and press .
You have three chances to enter the number correctly. After
that, you must reenter the entire REPORT command.
B-2 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE