Toshiba Adjustable Speed Drive H3 - Manual (Page 37)

TOSHIBA
BASE FREQUENCY #2 15 Base frequency #2 25 - 400 Hz 0.01/0.1 Hz 60.0 9-5
MAXIMUM OUTPUT 16 Maximum voltage #2 for 230V 0 - 255V 1V 230V 9-5
VOLTAGE #2 Maximum voltage #2 for 460V 0 - 510V 1V 460V 9-5
VOLTAGE BOOST #2 17 * 30 HP and less 0 - 30% 0.1% 3% 9-5
40 HP and greater 1%
ELECTRONIC THERMAL 18 Electronic thermal protection 10-100% or amps 1%/A 100 9-5
PROTECT LVL #2 level #2
STALL PROTECTION 19 turn stall #2 on/off 0: On ** - 0 9-5
SELECTION #2 1: Off
STALL PROTECTION 20** adjust stall current level #2 10-215% or amps 1%/A 120% 9-5
LEVEL #2
ACCELERATION TIME #2 21 60 HP and less 0.1-6000/0.01-600.0 0.1s/0.01s 10 sec 9-5
75 HP and greater 60 sec
DECELERATION TIME #2 22 60 HP and less 0.1-6000/0.01-600.0 0.1s/0.01s 10 sec 9-5
75 HP and greater 60 sec
ACC/DEC PATTERN #2 23 Acc/Dec pattern #2 0: Linear - 0 9-5
SELECTION 1: Self-adjusting
2: S-Pattern
3: Overspeed Pattern
ACC/DEC #1/#2 SWITCH 24 Hz at which to switch from 0 - Max. Output Freq. 0.1/0.01 Hz 0.0 9-5
FREQUENCY
ACC1/DEC1 to ACC2/DEC2 (Item 1)
8 - 2
GROUP:FUNDAMENTAL PARAMETERS #2
PARAMETER
DESCRIPTION
LIQUID CRYSTAL DISPLAY ADJUSTMENT
RANGE
ITEM
NO.
PAGE
NO.
DISPLAY
RESOLUTION
FACTORY
SETTING
*Item 17 is available only when Item 8, VOLTS PER HERTZ PATTERN Adjustment Range option 1 or 2
is selected.
**Item 20 is available only when Item 19 Adjustment Range option 0 is selected.
Specifications
Precautions
Wiring
Jumpers
Panel
Keypad
Parameters
Programming
Service
Dimensions
Index
Inspection