beautypg.com

Overview, About lan configuration, About dual network interfaces – TANDBERG D14049.04 User Manual

Page 57: Lan configuration

background image

57

D14049.04
JULY 2008

Grey Headline (continued)

To configure the VCS’s LAN 1 and LAN 2
ethernet port settings:

System Configuration > IP

.

You will be taken to the

IP

page.

xConfiguration Etherne

t

The VCS is shipped with a default IP
address for LAN 1 of 192.168.0.100.
This allows you to connect the VCS to

your network and access it via the default
address so that you can configure it remotely.

Save

Click here to save your changes.

Restart

Click here to restart the system.

You must save your changes and
restart the system for changes to take
effect.

LAN Configuration

Overview

About LAN Configuration

LAN 1 is the primary network port on the VCS.
You can configure the IPv4 address and subnet
mask, and IPv6 address for this port.
In addition, if you have the Dual Network
Interface option key installed, you will also be
able to configure the LAN 2 port.

About Dual Network Interfaces

The Dual Network Interface option enables the
LAN 2 port on the VCS for both management
and call signaling. This allows you to have a
secondary IP address for your VCS.
This configuration is intended for high-security
deployments where the VCS is located
in a DMZ between two separate firewalls
on separate network segments. In such
deployments, routers prevent devices on the
internal network from being able to route IP
traffic to the public internet, and instead the
traffic must pass through an application proxy
such as the VCS.
To enable this feature you must purchase and
install the appropriate Option Key. Contact
your TANDBERG representative for information.

IPv4 subnet mask

Specifies the IPv4 subnet mask of the VCS’s
LAN1 port.

IPv6 address

Specifies the IPv6 address of the VCS’s LAN1
port.

IPv4 address

Specifies the IPv4 IP address of the VCS’s
LAN1 port.

If you have the Dual Network Interfaces
option key installed, you will also be
able to configure the IPv4 address, IPv4

subnet mask and IPv6 address for the LAN2
port via this page.

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Introduction

Getting Started

Overview and

Status

System

Configuration

VCS

Configuration

Zones and

Neighbors

Call

Processing

Bandwidth

Control

Firewall

Traversal

Appendices

Applications

Maintenance

LAN