TANDBERG D14049.04 - Manual (Page 241)

241
D14049.04
JULY 2008
Grey Headline (continued)
Zones Zone [1..200] TraversalServer TCPProbe KeepAliveInterval: <1..65534>
Sets the interval (in seconds) with which the traversal client will send a TCP probe to the VCS once a call is established, in order to keep the firewall’s NAT bindings open.
Default: 20
Example: xConfiguration Zones Zone 3 TraversalServer TCPProbe KeepAliveInterval: 20
Zones Zone [1..200] TraversalServer TCPProbe RetryCount: <1..65534>
Sets the number of times the traversal client will attempt to send a TCP probe to the VCS.
Default: 5
Example: xConfiguration Zones Zone 3 TraversalServer TCPProbe RetryCount: 5
Zones Zone [1..200] TraversalServer TCPProbe RetryInterval: <1..65534>
Sets the frequency (in seconds ) with which the traversal client will send a TCP probe to the VCS.
Default: 2
Example: xConfiguration Zones Zone 3 TraversalServer TCPProbe RetryInterval: 2
Zones Zone [1..200] TraversalServer UDPProbe KeepAliveInterval: <1..65534>
Sets the interval (in seconds) with which the traversal client will send a UDP probe to the VCS once a call is established, in order to keep the firewall’s NAT bindings open.
Default: 20
Example: xConfiguration Zones Zone 3 TraversalServer UDPProbe KeepAliveInterval: 20
Zones Zone [1..200] TraversalServer UDPProbe RetryCount: <1..65534>
Sets the number of times the traversal client will attempt to send a UDP probe to the VCS.
Default: 5
Example: xConfiguration Zones Zone 3 TraversalServer UDPProbe RetryCount: 5
Zones Zone [1..200] TraversalServer UDPProbe RetryInterval: <1..65534>
Sets the frequency (in seconds) with which the traversal client will send a UDP probe to the VCS.
Default: 2
Example: xConfiguration Zones Zone 3 TraversalServer UDPProbe RetryInterval: 2
Zones Zone [1..200] Type:
Determines the nature of the specified zone, in relation to the Local VCS.
Neighbor : the new zone will be a neighbor of the Local VCS.
TraversalClient : there is a firewall between the zones, and the Local VCS is a traversal client of the new zone.
TraversalServer : there is a firewall between the zones and the Local VCS is a traversal server for the new zone.
ENUM : the new zone contains endpoints discoverable by ENUM lookup.
DNS : the new zone contains endpoints discoverable by DNS lookup.
Default: Neighbor
Example: xConfiguration Zones Zone 1 Type: Neighbor
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Command Reference - xConfiguration