Xconfiguration administratio, Xconfiguration alternate, Administration timeout – TANDBERG D14049.04 User Manual

Page 213: Command reference - xconfiguration

213

D14049.04
JULY 2008

Grey Headline (continued)

Administration HTTP Mode:

Determines whether HTTP calls will be redirected to the HTTPS port.

: calls will be redirected to HTTPS.

Off

: no HTTP access will be available.

Note: You must restart the system for any changes to take effect.
Default: On

Example:

xConfiguration Administration HTTP Mode: On

Administration HTTPS Mode:

Determines whether the VCS can be accessed via the web server. This must be

to enable both web interface and TMS access.

Note: You must restart the system for any changes to take effect.
Default: On

Example:

xConfiguration Administration HTTPS Mode: On

Administration SSH Mode:

Determines whether the VCS can be accessed via SSH and SCP.
Note: You must restart the system for any changes to take effect.
Default: On

Example:

xConfiguration Administration SSH Mode: On

Administration Telnet Mode:

Determines whether the VCS can be accessed via telnet.
Note: You must restart the system for any changes to take effect.
Default: Off

Example:

xConfiguration Administration Telnet Mode: Off

Administration TimeOut: <0..10000>

Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of

turns session time outs off.

Default: 0

Example:

xConfiguration Administration TimeOut: 0

Alternates Peer [1..6] Address:

Specifies the IP Address of one of the Peers in the Cluster to which this VCS belongs. A Cluster consists of up to 6 Peers, including the local VCS.
Note: Clusters should be managed via TMS.
Note: must be a Valid IPv4 or IPv6 address

Example:

xConfiguration Alternates 1 Peer Address: "10.13.0.2"

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Command Reference - xConfiguration