TANDBERG D14049.04 - Manual (Page 216)

216
D14049.04
JULY 2008
Grey Headline (continued)
Bandwidth Downspeed PerCall Mode:
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient per-call bandwidth available to fulfill the request.
On : the VCS will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed PerCall Mode: On
Bandwidth Downspeed Total Mode:
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient total bandwidth available to fulfill the request.
On : the VCS will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed Total Mode: On
Bandwidth Link [1..600] Name:
Assigns a name to this link.
Example: xConfiguration Bandwidth Link 1 Name: "HQ to BranchOffice"
Bandwidth Link [1..600] Node1 Name:
Specifies the first zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node1 Name: "HQ"
Bandwidth Link [1..600] Node2 Name:
Specifies the second zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node2 Name: "BranchOffice"
Bandwidth Link [1..600] Pipe1 Name:
Specifies the first pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe1 Name: "512Kb ASDL"
Bandwidth Link [1..600] Pipe2 Name:
Specifies the second pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe2 Name: "2Gb Broadband"
Bandwidth Pipe [1..100] Bandwidth PerCall Limit: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.
Default: 1920
Example: xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Limit: 256
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Command Reference - xConfiguration