Default links, About default links, Pre-configured links – TANDBERG D14049.04 User Manual
Page 142: Automatically created links, Links
142
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Links
Automatically Created Links
Whenever a new subzone or zone is created, links are
automatically created as follows:
New zone/subzone type
Default links are created to...
Subzone
Default Subzone
and
Traversal Subzone
Neighbor zone
Default Subzone
and
Traversal Subzone
DNS Zone
Default Subzone
and
Traversal Subzone
ENUM Zone
Default Subzone
and
Traversal Subzone
Traversal Client Zone
Traversal Subzone
Traversal Server Zone
Traversal Subzone
Along with the pre-configured default links this ensures that, by
default, any new subzone or zone has connectivity to all other
subzones and zones. You may rename, delete and amend any of
these default links.
Default Links
!
Calls will fail if links are not configured correctly. You
can check whether a call will succeed, and what
bandwidth will be allocated to it, using the command
.
Pre-Configured Links
The VCS is shipped with the Default Subzone, Traversal Subzone
and Default Zone already created, and with default links pre-
configured between the three. These links will be named as
follows:
DefaultSZtoTraversalSZ
•
DefaultSZtoDefaultZ
•
TraversalSZtoDefaultZ
•
You may rename, delete and amend these default links if you
need to model restrictions of your network.
If any of these links have been deleted, they may all be
automatically restored via:
xCommand DefaultLinksAdd
•
To restore these links via the web interface, you must do so
manually. See
for instructions on how to do this.
About Default Links
If a subzone has no links configured, then endpoints within the
subzone will only be able to call other endpoints within the same
subzone. For this reason, the VCS comes shipped with a set of
pre-configured links and will also automatically create new links
each time you create a new subzone.
You can edit any of these default links in the same way
you would edit manually configured links. See
for more information.