Ip status – TANDBERG D14049.04 User Manual
Page 31
31
D14049.04
JULY 2008
Grey Headline (continued)
Understanding the IP Status Page
The
IP Status
page provides details of the IP
and DNS settings of the VCS.
To view the
IP Status
page:
Status > System > IP
•
Viewing the IP Status Page
IPv4 gateway
The IPv4 gateway used by VCS.
LAN 2
If the Dual Network Interfaces option key has
been installed, this shows the IPv4 Address
and subnet mask, and IPv6 Address of the
LAN2 port.
LAN 1
Shows the IPv4 Address and subnet mask, and
IPv6 Address of the LAN1 port.
Protocol
Indicates the IP protocol supported by the VCS.
IPv4
: The VCS will only accept registrations
from endpoints using an IPv4 address, and
will only take calls between two endpoints
or devices communicating via IPv4. It will
communicate with other systems via IPv4 only.
IPv6
: The VCS will only accept registrations
from endpoints using an IPv6 address, and
will only take calls between two endpoints
communicating via IPv6. It will communicate
with other systems via IPv6 only.
Both
: The VCS will accept registrations from
endpoints using either an IPv4 or IPv6 address,
and will take calls using either protocol. If a
call is between an IPv4-only and an IPv6-only
endpoint, the VCS will act as an IPv4 to IPv6
gateway (note that this will require a traversal
call licence). The VCS can communicate with
other systems via either protocol.
IPv6 gateway
The IPv6 gateway used by VCS.
Server 1..5 address
The IP address(es) of each of the DNS
servers that will be queried when resolving
domain names. Up to 5 DNS servers may be
configured.
Domain
Specifies the name to be appended to the
host name before a query to the DNS server is
executed.
Dual Network Interfaces
Indicates whether the second LAN port has
been enabled. This is done by installing the
Dual Network Interfaces option key.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
IP Status