TANDBERG D14049.04 - Manual (Page 50)

50
D14049.04
JULY 2008
Grey Headline (continued)
Events and Levels
Event Description Level
Message Received An incoming RAS message has been received. 2
Message Received An incoming RAS NSM Keepalive, H.225 or H.245 message has been received. 3
Message Received (SIP) An incoming message has been received. 4
Message Rejected This could be for one of two reasons:
The VCS Authentication mode is set to 1. On , and an endpoint has unsuccessfully attempted to send a message (such as a registration request) to
the VCS. This could be either because the endpoint has not supplied any authentication credentials, or because its credentials do not match those
expected by the VCS.
Clustering is enabled but bandwidth across the cluster has not been configured identically, and the VCS has received a message relating to an unknown
2.
Peer, Link, Pipe, Subzone or Zone. Use TMS to synchronize configuration across Peers.
1
Message Sent An outgoing RAS message has been sent. 2
Message Sent An outgoing RAS NSM Keepalive, H.225 or H.245 message has been sent. 3
Message Sent (SIP) An outgoing message has been sent. 4
Policy Change A policy file has been updated. 1
Registration Accepted A registration request has been accepted. 1
Registration Refresh
Accepted
A request to refresh or keep a registration alive has been accepted. 3
Registration Refresh
Rejected
A request to refresh a registration has been rejected. 1
Registration Refresh
Requested
A request to refresh or keep a registration alive has been received. 3
Registration Rejected A registration request has been rejected. The Reason event parameter contains the H.225 cause code. Optionally, the Detail event parameter may
contain a textual representation of the H.225 additional cause code.
1
Registration Removed A registration has been removed by the VCS. The Reason event parameter specifies the reason why the registration was removed. This is one of:
Authentication change •
Conflicting zones •
Operator forced removal •
Operator forced removal (all registrations removed) •
Registration superseded. •
1
Registration Requested A registration has been requested. 1
Request Received A call-related SIP request has been received. 2
Request Received A non-call-related SIP request has been received. 3
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Event Log