Enter the 16-character Release Key that has
been provided to you. This is not required if
you are upgrading to a dot release, e.g. X3.0
to X3.1.
If you have cut and pasted the release key,
ensure there are no leading or trailing spaces.

Install Software

Click

Install Software

. After a few moments

you will be taken to the

Upgrade Confirmation

page. This page will list any warnings of which
you need to take note before proceeding with
the upgrade.

Select the software file

Enter the path of the software image file, or
click

Browse

to locate it on the network.

System Information

This section tells you about the
software and hardware that currently
make up your system.

Upgrading via the Web Interface

Before you start the upgrade, ensure
that the software image file for the new
version has been saved in a network

location that can be accessed via the web
interface. Also ensure that you have the
16-character Release Key readily available (this
is not required if you are upgrading to a dot
release, e.g. X3.0 to X3.1).

To upgrade your software via the web interface:

Maintenance > Upgrade

•

You will be taken to the

Upgrade

page.

You must restart the system after you
have uploaded the new software
version and confirmed the upgrade, in

order for the installation to complete. Any
configuration changes you make between
confirming the upgrade and restarting will be
lost, so we recommend restarting your system
immediately.

Continue with Upgrade

Check the details and click

Continue with

Upgrade

to proceed.

Abort Upgrade

Click here to cancel the upgrade and return to
the

Upgrade

page.