TANDBERG D14049.04 - Manual (Page 206)

206
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
VCS Port Reference
VCS Ports
Service/Function Description Default Available Range Configurable via
SIP TCP outbound port
range The range of ports to be used by outbound TCP/
TLS SIP connections to a remote SIP device 25000 - 29999
TCP/TLS 1024 - 65533 VCS Configuration > Protocols > SIP > Configuration
xConfiguration SIP TCP Outbound Port Start
xConfiguration SIP TCP Outbound Port End
Traversal media port range For traversal calls (i.e. where the VCS is taking
the media as well as the signaling), the range
of ports to be used for the media. Ports are
allocated from this range in pairs, the first of
each being even. Therefore the range must
start with an even number. See
Configuring the
Traversal Subzone Ports for more information.
50000 - 51199
UDP 1024 - 65533 VCS Configuration > Local Zone > Traversal Subzone
xConfiguration Traversal Media Port Start
xConfiguration Traversal Media Port End
STUN Relay media port
range The range of ports to be used for STUN media
relay. 60000 - 61200
UDP 1024 - 65534 VCS Configuration > Expressway > STUN
xConfiguration Traversal Server STUN Relay Media Port Start
xConfiguration Traversal Server STUN Relay Media Port End
LDAP used for outbound connection to an LDAP server
(if the VCS is configured to use an LDAP server
for H.350 authentication) a random TCP source port is used
TMS used for outbound connection to TMS a random source port in the range 32768 - 65535 is used
User Policy Server used for outbound connection to a User Policy
Server a random source port in the range 32768 - 65535 is used