Xconfiguration traversal server, Stun, Xconfiguration traversal server stun relay port – TANDBERG D14049.04 User Manual
Page 229: Command reference - xconfiguration

229
D14049.04
JULY 2008
Grey Headline (continued)
Traversal Server Media Demultiplexing RTP Port: <1024..65534>
Specifies the port on the VCS to be used for demultiplexing RTP media. Note: You must restart the system for any changes to take effect.
Default: 2776
Example:
xConfiguration Traversal Server Media Demultiplexing RTP Port: 2776
Traversal Server STUN Discovery Mode:
Determines whether the VCS will offer STUN discovery services to traversal clients.
Default: On
Example:
xConfiguration Traversal Server STUN Discovery Mode: On
Traversal Server STUN Discovery Port: <1024..65534>
Specifies the port to be used for STUN discovery services.
Default: 3478
Example:
xConfiguration Traversal Server STUN Discovery Port: 4678
Traversal Server STUN Relay Media Port End: <1024..65534>
Specifies the upper port in the range to be used for STUN media relay.
Default: 61200
Example:
xConfiguration Traversal Server STUN Relay Media Port End: 61200
Traversal Server STUN Relay Media Port Start: <1024..65534>
Specifies the lower port in the range to be used for STUN media relay.
Default: 60000
Example:
xConfiguration Traversal Server STUN Relay Media Port Start: 60000
Traversal Server STUN Relay Mode:
Determines whether the VCS will offer STUN relay services to traversal clients.
Default: On
Example:
xConfiguration Traversal Server STUN Relay Mode: On
Traversal Server STUN Relay Port: <1024..65534>
Specifies the listening port for STUN relay requests.
Default: 4678
Example:
Traversal Server STUN Relay Port: 4678
Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: <1..100000000>
Specifies the bandwidth limit (in kbps) for any one call to or from an endpoint in the Default Subzone (applies only if Mode is set to Limited).
Default: 1920
Example:
xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: 1920
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration