TANDBERG D14049.04 - Manual (Page 166)

166
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
FindMe™ (User Policy)
Enabling FindMe on the VCS
Save
Click here to save your changes.
Mode
Determines whether or not User Policy will be
enabled, and if so, the location of the User
Policy Manager.
Off : User Policy is not enabled.
Local : User Policy is enabled and the VCS’s
own User Policy Manager is used.
Remote : User Policy is enabled and a third-
party User Policy Manager located on another
system is used (this feature is intended for
future third-party integration). If you select
this option, further configuration options will
appear (see below).
Configuring User Policy Manager
FindMe requires a User Policy Manager. The
VCS has its own User Policy Manager, but there
is also the ability to connect to a User Policy
Manager located on another system.
To configure the User Policy Manager:
Applications > FindMe > Configuration • .
You will be taken to the User Policy page.
xConfiguration Policy UserPolic • y
Path
The URL of the remote User Policy Manager.
Username
The username used by the VCS to log in and
query the remote User Policy Manager.
Protocol
The protocol used to connect to the remote
User Policy Manager.
Address
The IP address or domain name of the remote
User Policy Manager.
Password
The password used by the VCS to log in and
query the remote User Policy Manager.
Administrator Policy will always be
applied regardless of the User Policy
mode.