TANDBERG D14049.04 - Manual (Page 249)

249
D14049.04
JULY 2008
Grey Headline (continued)
Locate
Runs the VCS's location algorithm to locate the endpoint identified by the given alias, searching locally, on neighbors, and on systems discovered through the DNS system, within the
specified number of 'hops'. Results are reported back through the xFeedback mechanism, which must therefore be activated before issuing this command (e.g.
xFeedback register
event/locate ).
Alias (r) :
The alias associated with the endpoint you wish to locate.
HopCount (r) : <0..255>
The hop count to be used in the search.
Protocol (r) :
The protocol used to initiate the search.
Example: xCommand Locate Alias: "[email protected]" HopCount: 15 Protocol: SIP
OptionKeyAdd
Adds a new option key to the VCS. These are added to the VCS in order to add extra functionality, such as increasing the VCS's capacity. Contact your TANDBERG representative for further
information.
Key (r) :
Specifies the option key of your software option.
Example: xCommand OptionKeyAdd Key: "1X4757T5-1-60BAD5CD"
OptionKeyDelete
Deletes a software option key from the VCS.
OptionKeyId (r) : <1..64>
Specifies the ID of the software option to be deleted.
Example: xCommand OptionKeyDelete OptionKeyId: 2
PipeAdd
Adds and configures a new pipe.
PipeName (r) :
Assigns a name to this pipe.
TotalMode:
Determines whether or not this pipe is enforcing total bandwidth restrictions. NoBandwidth: no bandwidth available; no calls can be made using this pipe. Default: Unlimited.
Total: <1..100000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe. Default: 500000.
PerCallMode:
Determines whether or not this pipe is limiting the bandwidth of individual calls. NoBandwidth: no bandwidth available; no calls can be made using this pipe. Default: Unlimited.
PerCall: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call. Default: 1920.
Example: xCommand PipeAdd PipeName: "512k ADSL" TotalMode: Limited Total: 512 PerCallMode: Limited PerCall: 128
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Command Reference - xCommand