Creating a subzone, Subzones – TANDBERG D14049.04 User Manual
Page 137
137
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Subzones
Name
Enter the name you wish to assign to the subzone. You will refer
to this name when creating Links.
Address range =
This shows the range of IP addresses that will be allocated to
this subzone, based on the combination of the subnet address
and prefix length that have been configured.
Prefix length
Enter the number of bits of the
Subnet IP Address
which must
match for an IP address to belong in this subzone.
Create Subzone
Click here to create the subzone and return to the subzones
page.
Bandwidth
See
Applying Bandwidth Limitations to Subzones
for a
description of these fields.
Creating a Subzone
To add a new subzone:
VCS Configuration > Local Zone > Subzones
•
.
You will be taken to the
Subzones
page.
Select
New
.
You will be taken to the
Create Subzone
page.
Subnet 1 address
Enter the IP address of the subnet. In conjunction with the
Prefix
, this will define the range of IP addresses that will belong
to this subzone.
Up to 4 further subnets can be configured once the
subzone has been created via the
page.