Xconfiguration zones localzone, Command reference - xconfiguration – TANDBERG D14049.04 User Manual

Page 232

232

D14049.04
JULY 2008

Grey Headline (continued)

Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Limit: <1..100000000>

Specifies the bandwidth limit (in kbps) for any one call between two endpoints within this subzone (applies only if Mode is set to Limited).
Default: 1920

Example:

Zones LocalZone SubZone 1 Bandwidth PerCall Intra Limit: 1920

Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Mode:

Determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone.

NoBandwidth

: no bandwidth available. No calls can be made within this subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth PerCall Intra Mode: Limited

Zones LocalZone SubZone [1..100] Bandwidth Total Limit: <1..100000000>

Sets the total bandwidth limit (in kbps) of this subzone (applies only if Mode is set to Limited).
Default: 500000

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth Total Limit: 500000

Zones LocalZone SubZone [1..100] Bandwidth Total Mode:

Determines whether this subzone has a limit on the total bandwidth of calls being used by its endpoints at any one time.

NoBandwidth

: no bandwidth available. No calls can be made to, from, or within this subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth Total Mode: Limited

Zones LocalZone SubZone [1..100] Name:

Assigns a name to this subzone.

Example:

xConfiguration Zones LocalZone SubZone 1 Name: "BranchOffice"

Zones LocalZone SubZone [1..100] Subnet [1..5] IP Address:

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a subnet to be assigned to this subzone.
Default: 0.0.0.0

Example:

xConfiguration Zones LocalZone SubZone 1 Subnet 1 IP Address: 192.168.0.0

Zones LocalZone SubZone [1..100] Subnet [1..5] IP PrefixLength: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP Address to belong in this subzone.
Default: 32

Example:

xConfiguration Zones LocalZone SubZone 1 Subnet 1 IP PrefixLength: 64

Zones LocalZone Traversal H323 Assent Mode:

Determines whether or not H.323 calls using Assent mode for firewall traversal will be allowed. Applies to traversal-enabled endpoints registered directly with the VCS.
Default: On

Example:

xConfiguration Zones LocalZone Traversal H323 Assent Mode: On

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE