Events and levels, Event log – TANDBERG D14049.04 User Manual
Page 49
49
D14049.04
JULY 2008
Grey Headline (continued)
Events and Levels
Event
Description
Level
Admin Session Finish
An administrator has logged off the system.
1
Admin Session Login Failure
An unsuccessful attempt has been made to log in as an administrator. This could be because an incorrect username or password (or both) was entered.
1
Admin Session Start
An administrator has logged onto the system.
1
Application Failed
The VCS application is out of service due to an unexpected failure.
1
Application Start
The VCS has started. Further detail may be provided in the
Detail
event parameter.
1
Application Warning
The VCS application is still running but has experienced a recoverable problem. Further detail may be provided in the
Detail
event parameter.
1
Beginning System Backup
A system backup has started.
1
Beginning System Restore
A system restore has started.
1
Call Answer Attempted
An attempt to answer a call has been made.
1
Call Attempted
A call has been attempted.
1
Call Connected
A call has been connected.
1
Call Diverted
A call has been diverted.
1
Call Disconnected
A call has been disconnected.
1
Call Rejected
A call has been rejected. The
Reason
event parameter contains a textual representation of the H.225 additional cause code.
1
Completed System Backup
A system backup has completed.
1
Completed System restore
A system restore has completed.
1
Decode Error
A syntax error was encountered when decoding a SIP or H.323 message.
1
Eventlog Cleared
An operator cleared the event log.
1
External Server
Communication Failure
Communication with an external server failed unexpectedly. The
Detail
event parameter should differentiate between ‘no response’ and ‘request
rejected’. Servers concerned are:
DNS
•
LDAP servers
•
Neighbor Gatekeeper
•
NTP servers
•
Peers
•
1
Hardware Failure
There is an issue with the VCS hardware. If the problem persists, contact your TANDBERG support representative.
1
License Limit Reached
Licensing limits for a given feature have been reached. The
Detail
event parameter specifies the facility/limits concerned. Possible values for the detail
field are:
Non Traversal Call Limit Reached
•
Traversal Call Limit Reached
•
1
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Event Log