TANDBERG D14049.04 - Manual (Page 189)

189
D14049.04
JULY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Restarting
Restarting the VCS
Some configuration changes will require a restart of the VCS
before they take effect. There will be a
Restart button at the
bottom of any web pages that include such options, and clicking
on this button will take you to the
Restart page. If you do not
restart the system after making these changes, you will receive
a warning telling you the system needs to be restarted.
Restarting will cause any active calls and registrations to be
terminated. For this reason, the
Restart page displays the
number of current calls and registrations, so you can check
these before you restart.
If you do not restart the system immediately, you should
refresh this page before restarting to check the current
status of calls and registrations.
Restart System
Click here to restart the system.
The
Restarting page will appear, with an orange bar indicating
progress.
Once the system has successfully restarted, you will
automatically be taken to the
Login page.
! Do not restart the system while the red ALM LED on the
front of the box is on. This indicates a hardware fault.
Contact your TANDBERG representative.
To restart the VCS:
Maintenance > Restart • .
You will be taken to the Restart page.
From any configuration page, click the Restart button. •
You will be taken to the Restart page.
xCommand Boo • t
Overview