Motorola VC5090 User Manual
Page 63
Installation 2 - 35
Figure 2-51
Position of SD Card
5.
Snap the retaining door closed.
Figure 2-52
Close Retaining Door
6.
Place the UPS/Memory Card door over the UPS and secure using the eight new screws.
7.
Torque the screws to 9 +/- 0.5 kgf/cm (7.8 ± 0.4 in-lbs).
8.
Place the Main Power switch to the on position.
CAUTION
Ensure that you torque the screws to seal the device properly. Otherwise, sealing can be compromised.