Mounting onto an over-head cross-beam example, Mounting onto an over-head cross-beam example -6 – Motorola VC5090 User Manual
Page 34
2 - 6
VC5090 Vehicle Computer Product Reference Guide
Important Fixing Information
•
Mounting surface must be flat and stiff and it must extend evenly for the entire length of the mounting bracket
surface.
•
All four mounting holes must be used.
•
All nuts and bolts must be checked periodically and tightened if required.
•
When installing the vehicle computer, care must be taken to ensure that the mounting bracket footprint is fully
supported. Additional plates may be required to achieve this.
•
Do not mount the vehicle computer with the mounting bracket perpendicular to a wall as shown in
Figure 2-6
Incorrect Mounting
Mounting onto an Over-Head Cross-Beam Example
The diagram below illustrates a typical installation where the vehicle computer is mounted onto a cross-beam.
CAUTION
Any modification to supplied mounting bracket could cause failure of the unit and/or mountings.