Motorola VC5090 User Manual
Page 57
Installation 2 - 29
2.
Tap the
SerialWedge
icon
in the task tray.
3.
Select
Configuration
>
Port Selection
from the pop-up menu. The
Port Selection
window appears.
Figure 2-43
Port Selection Window
4.
Select the COM port radio button to match the COM port that you connected the scanner cable to.
5.
Tap
OK
.
The scanner beeps to indicate that it is receiving power.
6.
Tap the
SerialWedge
icon in the task tray.
7.
For serial connections, select
Configuration
>
Port Configuration
from the pop-up menu. The
Communication
Parameters
window appears.
Figure 2-44
Communications Parameters Window
8.
Use the drop-down lists to select the parameter values to match the scanner. Refer to the scanner Product
Reference Guide for more information.
9.
Tap
OK
.
10.
Tap the
SerialWedge
icon in the task tray.
11.
Select
Configuration
>
Barcode Settings
from the pop-up menu. The
Barcode Settings
window appears.