Motorola VC5090 - Manual (Page 59)

Installation 2 - 31
Verifying the Scanner is Working Properly
To display scanner bar code data on the display:
1. Tap the SerialWedge icon in the task tray.
2. Select Show UI . The Show Barcode data window appears.
Figure 2-46 Show Barcode Data Window
3. Aim the scanner at a bar code and press the scan trigger. The bar code data appears in the window.
Pairing Bluetooth Scanner and Cradle
The Bluetooth scanner cradle receives power from the vehicle computer. When the vehicle computer goes into
suspend mode the vehicle computer removes power to the cradle. When the vehicle computer resumes normal
operation, power is re-applied to the cradle. If power to the cradle was removed for more than 30 seconds, the
scanner needs to re-connect (pair) to the cradle. Press the scanner trigger to re-connect the scanner to the cradle.
The scanner emits a lo-high beep when re-connecting.