Motorola VC5090 - Manual (Page 60)

2 - 32 VC5090 Vehicle Computer Product Reference Guide
Installing the Uninterruptable Power Supply
To install the UPS:
1. Place the Main Power switch on top of the vehicle computer to the off position.
2. Remove and discard the eight screws securing the UPS/Memory Card door on the back of the vehicle
computer.
Figure 2-47 UPS/Memory Card Door Removal
3. Connect the UPS connector to the connector on the printed circuit board (PCB).
4. Place the UPS into the well.
NOTE The Uninterruptable Power Supply (UPS) Kit comes with eight replacement screws.
CAUTION Use ESD precautions when installing the UPS.