Motorola VC5090 - Manual (Page 133)

Wireless Applications 4 - 39
• Launched by Wireless Application, because the service is trying to verify the credentials due to credential
caching rules.
• Launched by a user, when a user is logged in.
• Launched by a user, when no user is logged in.
Tapping OK sends the credentials though Wireless Application API. If there are no credentials entered, a dialog box
displays informing the user which field was not entered.
The Log Off button only displays when a user is already logged on. When the Log Off button is tapped, the user is
prompted with three options: Log Off, Switch Users, and Cancel. Switching users logs off the current user and
re-initialize the login dialog box to be displayed for when there is no user logged on. Logging off logs off the current
user and close the login dialog box. Tapping
Cancel closes the Log Off dialog box and the Login dialog box
displays.
When the user is logged off, the vehicle computer only roams to profiles that do not require credentials or to
profiles that were created with the credentials entered into the profile
The Cancel button closes the dialog without logging into the network. If the login dialog was launched by the
Wireless Application and not by the user, tapping Cancel first causes a message box to display a warning that the
cancel disables the current profile. If the user still chooses to cancel the login at this point, the profile is cancelled.
Once a profile is cancelled, the profile is suppressed until a user actively re-enables it or a new user logs onto the
vehicle computer.
Table 4-29 Log On/Off Options
Field Description
Wireless Profile Field When launching the login application, the Wireless Profile field has available all the
wireless profiles that require credentials. This includes profiles that use EAP TLS,
PEAP, LEAP, and EAP-TTLS.
Profile Status Icon The profile status icon (next to the profile name) shows one of the following states:
The selected profile is cancelled.
The selected profile is enabled but is not the current profile.
The profile is the current profile (always the case for when the Wireless Application
is launched).
Network Username and
Password Fields The Network Username and Network Password fields are used as credentials for
the profile selected in the Wireless Profile field. Currently these fields are limited to
159 characters.
Mask Password Checkbox The Mask Password checkbox determines whether the password field is masked
(i.e., displays only the '*' character) or unmasked (i.e., displays the entered text).
Check the box to unmask the password. Uncheck the box to mask the password
(the default).
Status Field The status field displays status that is important to the login dialog. If the user opens
the dialog and needs to prompt for credentials for a particular profile at this time, it
can use the status field to let the user know that the network is held up by the
password dialog being open.