Motorola VC5090 - Manual (Page 53)

Installation 2 - 25
Connecting a DS/LS3478 USB Scanner
To connect a DS3478 or LS3478 USB scanner to the VC5090:
1. Connect the USB scanner cable to the FL3478 cradle.
2. Connect the USB scanner cable to the USB/Keyboard connector.
Figure 2-32 Connecting USB Scanner to Keyboard Connector
3. Scan the Pair bar code on the cradle.
4. Scan the Set All Defaults bar code.
Figure 2-33 Set All Defaults Bar Code
5. Scan the HID Keyboard Emulation bar code.
Figure 2-34 HID Keyboard Emulation Bar Code
6. Scan the Simple COM Port Emulation bar code.
Figure 2-35 Simple COM Port Emulation Bar Code
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
USB/Keyboard Connector USB Cable