Installing a secure digital card, Installing a secure digital card -34 – Motorola VC5090 User Manual
Page 62
2 - 34 VC5090 Vehicle Computer Product Reference Guide
Installing a Secure Digital Card
A Secure Digital (SD) card provides secondary non-volatile storage. The card holder is located on the back of the
VC5090.
To install the SD card:
1.
Place the Main Power switch on the top of the vehicle computer to the off position.
2.
Remove and discard the eight screws securing the UPS/Memory Card door.
Figure 2-49
UPS/Memory Card Door Removal
3.
Lift the SD card retaining door.
Figure 2-50
Lift Retaining Door
4.
Position the SD card, with the contacts down, into the card holder. The SD card corner notch fits into the holder
only one way.
Retaining Clip