Password, Advanced identity, Password -15 advanced identity -15 – Motorola VC5090 User Manual
Page 109
Wireless Applications 4 - 15
Password
Use the
Password
dialog box to enter a password. If EAP/TLS is the selected authentication type, the password is
not required and the field is disabled.
Figure 4-19 Password Dialog Box
1.
Enter a password in the
Password
field.
2.
Select the Advanced ID check box, if advanced identification is required.
3.
Tap Next. The Encryption dialog box displays. See
.
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
Figure 4-20 Advanced Identity Dialog Box
Tap
Next
. The
Encryption
dialog box displays.
NOTE
When authenticating with a Microsoft IAS server, do not use advanced identity.