6 configure first person in – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 97

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
97
7.7.5 Configure Card Reader Authentication Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your actual needs.
Perform this task if you need to configure the card reader’s authentication mode and schedule.
1. Click
Access Control
→
Advanced Function
→
Card Reader Authentication
to enter the card reader
authentication configuration page.
2. Select a card reader on the left to configure.
3. Set card reader authentication mode.
1) Click
Configuration
.
NOTE:
Password refers to the card password set when issuing the card to the person. For details,
refer to
Add Single Person
.
Authentication password refers to the password set to open the door. Refer to Configure
Authentication Password.
The supported card reader authentication mode varies according to different devices. For details, refer
to the actual product.
2) Select the modes and click
to add to the selected modes list.
3) (Optional): Click or to adjust the display order.
4) Click
OK
. After selecting the modes, the selected modes will display as icons.
4. Click the icon to select a card reader authentication mode, and drag on the day to draw a color bar on the
schedule, which means in that period of time, the card reader authentication is valid.
5. Repeat the above step to set other time periods.
6. (Optional): Select a configured day and click
Copy to Week
to copy the same settings to the whole week.
7. (Optional): Click
Copy to
to copy the settings to other card readers.
8. Click
Save
.
7.7.6 Configure First Person In
You can set multiple first persons for one access control point. After the first person is authorized, it allows
multiple persons access the door or other authentication actions.
Before You Start
Set the access group and apply the access group to the access control device. For details, refer to
Group to Assign Access Authorization to Persons
Perform this task when you want to configure opening door with first person.