Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 17

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
17
Figure 2, Install Gang Box
2. Use four supplied screws (KA4×22) to secure the mounting plate on the gang box.
Figure 3, Secure Mounting Plate
3. Remove the back sheet of the device with tools to display the wiring terminals.
4. Route the cable through the cable hole of the mounting plate, and connect to corresponding external
devices’ cables.
5. Align the device with the mounting plate and hang the device on the mounting plate.