3 communication settings, 1 set network parameters – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 36

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
36
Figure 29, Home Page
NOTE:
The device will lock for 30 minutes after five failed identity or card attempts.
3. (Optional): Tap and you can enter the device activation password for login.
4. (Optional): Tap and you can exit the admin login page.
6.3 Communication Settings
You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, and the Wiegand
parameters on the communication settings page.
6.3.1 Set Network Parameters
You can set the device network parameters, including the IP address, the subnet mask, and the gateway.
1. Tap
Comm.
(Communication Settings) on the Home page to enter the Communication Settings page.
2. On the Communication Settings page, tap
Network
to enter the Network tab.