4 upload an identity photo from local pc, 5 take a photo via client – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 75
DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
75
the sector of the card to encrypt.
7. Click
OK
to confirm the operation.
8. Place the card on the card enrollment station, and click
Read
to get the card number. The card number will
display in the Card No. field automatically.
9. Click
Add
. The card will be issued to the person.
7.4.4 Upload an Identity Photo from Local PC
When adding person, you can upload an identity photo stored in local PC to the client as the person’s profile.
1. Enter
Person
module.
2. Select an organization in the organization list to add the person and click
Add
.
NOTE:
Enter the person’s basic information first. For details about configuring person’s basic
3. Click
Add Face
in the Basic Information panel.
4. Select
Upload
.
5. Select a picture from the PC running the client.
NOTE:
The picture should be in JPG or JPEG format and smaller than 200 KB.
6. (Optional): Enable
Verify by Device
to check whether the facial recognition device managed in the client
can recognize the identity in the photo.
7. Confirm to add the person.
•
Click
Add
to add the person and close the Add Person window.
•
Click
Add and New
to add the person and continue to add other persons .
7.4.5 Take a Photo via Client
When adding person, you can take a photo of the person by the webcam of the PC running the client and set
this photo as the person’s profile.
Before You Start
Add at least one access control device checking whether the identity in the photo can be recognized by the
identity authentication device managed by the client.
1. Enter
Person
module.
2. Select an organization in the organization list to add the person and click
Add
.
NOTE:
Enter the person’s basic information first. For details about configuring person’s basic