Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 63)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 63
Chapter 7 Client Software Configuration
7.1 Configuration Flow of Client Software
Follow the flow diagram below to configure on the client software.
Figure 48, Flow Diagram of Configuration on Client Software
7.2 Device Management
The client supports managing access control devices and video intercom devices.
Example: You can control entrance and exit and manage attendance after adding access control
devices to the client; you can perform video intercom with the indoor stations and door
stations.
7.2.1 Add Device
The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol. The
client also supports importing multiple devices in a batch when there are large amount of devices to be added.
Add Online Device
The active online devices in the same local subnet with the client software will be displayed on the Online
Device area. You can click Refresh Every 60s to refresh the information of the online devices.