Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 50)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 50
Parameter Description
By default, the resolution is 70.
Face with Mask
Detection
After the function is enabled, when a person authenticates the permissions on
the authentication page, the device can recognize the identity whether wearing
a mask or not, and prompts to wear a mask according to the configuration.
Face with Mask &
Face (1:N)
Matching threshold for identity with mask 1 : N. The larger the value, the smaller
the false accept rate and the larger the false rejection rate. By default, the value
is 45.
Must Wear Face Mask After the function is enabled, the authenticated person must wear a face mask,
otherwise the authentication will be failed.
Reminder of Wearing
Face Mask
After the function is enabled, if the authenticating person does not wear a face
mask, a prompt will be pop up to remind to wear a face mask.
ECO Mode
After enabling the ECO mode, the device will use the IR camera to authenticate
identities in the low light or dark environment. And you can set he ECO mode
threshold, ECO mode (1:N), and ECO mode (1:1).
ECO Mode Threshold When enabling the ECO mode, you can set the ECO mode’s threshold. The larger
the value, the easier the device entering the ECO mode. Available range: 0 to 8.
ECO Mode (1:N)
Set the matching threshold when authenticating via ECO mode 1:N matching
mode. The larger the value, the smaller the false accept rate and the larger the
false rejection rate. By default, the value is 84.
ECO Mode (1:1)
Set the matching threshold when authenticating via ECO mode 1:1 matching
mode. The larger the value, the smaller the false accept rate and the larger the
false rejection rate. By default, the value is 75.
Face with Mask&Face
1:N (ECO)
Matching threshold for identity with mask 1: N in ECO mode. The larger the
value, the smaller the false accept rate and the larger the false rejection rate.
6.7.3 Set Time
You can set the device time and the DST in this section.
Tap Time (Time Settings) on the Home page to enter the Time Settings page. Edit the time parameters and tap
to save the settings.