Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 72)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 72
7.3.3 Edit Resource Parameters
After importing the resources to the group, you can edit the resource parameters. For access point, you can
edit the access point name. For alarm input, you can edit the alarm input name. Here we take access point as
an example.
Before You Start
Import the resources to group.
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page. All the added groups are
displayed on the left.
3. Select a group on the group list and click Access Point . The access points imported to the group will
display.
4. Click in the Operation column to open the Edit Resource window.
5. Edit the resource name.
6. Click OK to save the new settings.
7.3.4 Remove Resources from Group
You can remove the added resources from the group.
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page. All the added groups are
displayed on the left.
3. Click a group to show the resources added to this group.
4. Select the resource(s) and click Delete to remove the resource(s) from the group.
7.4 Person Management
You can add person information to the system for further operations such as access control, video intercom,
time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch,
importing and exporting person information in a batch, etc.
7.4.1 Add Organization
You can add an organization and import person information to the organization for effective management of
the persons. You can also add a surbodinate organization for the added one.
1. Enter Person module.
2. Select a parent organization in the left column and click Add in the upper-left corner to add an
organization.