6 search and edit user, 5 temperature measurement settings – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 45

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
45
Control Settings page. For details see
Setting Access Control Parameters
.
•
Custom
– You can combine different authentication modes together according to your actual needs.
4. Tap
to save the settings.
6.4.6 Search and Edit User
After adding the user, you can search for and edit the user.
•
Search User
– On the User Management page, Tap the search area to enter the Search User page. Tap
Card
on the left of the page and select a search type from the drop-down list. Enter the employee ID, card
No., or the user name for search. Tap to search.
•
Edit User
– On the User Management page, select a user from the user list to enter the Edit User page.
Follow the steps in
to edit the user parameters. Tap
to save the settings.
NOTE:
The employee ID cannot be edited.
6.5 Temperature Measurement Settings
You can set the temperature measurement parameters, including temperature detection, over-temperature
alarm threshold, temperature compensation, door not open when temperature is abnormal, temperature
measurement mode, temperature unit, measurement area calibration, measurement area, etc.
On the Home page, tap
Temp
(Temperature) to enter the Temperature Settings page. Edit the temperature
measurement parameters on this page and tap
to save the settings.
Figure 35, Temperature Measurement Parameters