Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 67

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
67
You can log into the device to get the certificate file by Web browser.
6. Check
Synchronize Time
to synchronize the device time with the PC running the client after adding the
device to the client.
7. (Optional): Check
Import to Group
to create a group by the device name, and import all the channels of
the device to this group.
Example:
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
8. Finish adding the device.
•
Click
Add
to add the device and back to the device list page.
•
Click
Add and New
to save the settings and continue to add other device.
Add Devices by IP Segment
If the devices share the same port No., user name and password, and their IP addresses ranges in the same IP
segment, you can add them to the client by specifying the start IP address and the end IP address, port No.,
user name, password, etc of the devices.
1. Enter the Device Management module.
2. Click
Device
tab on the top of the right panel. The added devices are displayed on the right panel.
3. Click
Add
to open the Add window.
4. Select
IP Segment
as the adding mode.
5. Enter the required information.
•
Start IP
– Enter a start IP address.
•
End IP
– Enter an end IP address in the same network segment with the start IP.
•
Port
– Enter the device port No. The default value is
8000
.
•
User Name
– By default, the user name is
admin
.
•
Password
– Enter the device password.
STRONG PASSWORD RECOMMENDED
−
The password strength of the device can be
automatically checked. We highly recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in high security systems, resetting the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end user.