2 configure remaining open/closed – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 92

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
92
Liveness Detection Security Level –
After enabling Live Identity Detection function, you can set the
matching security level when performing live identity authentication.
4. Click
OK
.
5. (Optional): Click
Copy to
, and then select the card reader(s) to copy the parameters in the page to the
selected card reader(s).
7.7.2 Configure Remaining Open/Closed
You can set the status of the door as open or closed. For example, you can set the door remaining closed in
the holiday, and set the door remaining open in the specified period of the work day.
Before You Start
Add the access control devices to the system.
1. Click
Access Control
→
Advanced Function
→
Remain Open/Closed
to enter the Remain Open/Closed
page.
2. Select the door that need to be configured on the left panel.
3. To set the door status during the work day, click the
Week Schedule
and perform the following operations.
1) Click
Remain Open
or
Remain Closed
.
2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access
group is activated.
NOTE:
Up to eight time durations can be set to each day in the week schedule.
3) (Optional): Perform the following operations to edit the time durations.
•
Move the cursor to the time duration and drag the time duration on the timeline bar to the
desired position when the cursor turns to
.
•
Click the time duration and directly edit the start/end time in the appeared dialog.
•
Move the cursor to the start or the end of time duration and drag to lengthen or shorten the time
duration when the cursor turns to
.
4) Click
Save
.
Related Operations
•
Copy to Whole Week
– Select one duration on the time bar, click
Copy to Whole Week
to copy all the
duration settings on this time bar to other week days.
•
Delete Selected
– Select one duration on the time bar, click
Delete Selected
to delete this duration.
•
Clear
– Click
Clear
to clear all the duration settings in the week schedule.
4. To set the door status during the holiday, click the
Holiday
and perform the following operations.