Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal - Manual (Page 55)

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA 55
NOTE: The function should be used cooperatively with time and attendance function on the client
software.
6.10.1 Disable Attendance Mode via Device
Disable the attendance mode and the system will not display the attendance status on the initial page.
Tap T&A Status to enter the T&A Status page.
Figure 43, Disable Attendance Mode
Set the Attendance Mode as Disable . And tap .
You will not view or configure the attendance status on the initial page. And the system will follow the
attendance rule that configured on the platform.
6.10.2 Set Auto Attendance via Device
Set the attendance mode as auto, and you can set the attendance status and its available schedule. The
system will automatically change the attendance status according to the configured parameters.
Before You Start
Add at least one user, and set the user’s authentication mode. For details, see User Management .
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Auto.