2 surface mounting – Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 18

DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
18
Figure 4, Hang Device
6. Use the two screws at the bottom of the device to secure the device on the mounting plate.
Figure 5, Secure Device
3.2.2 Surface Mounting
NOTE:
The additional force shall be equal to three times the weight of the equipment. The
equipment ad its associated mounting means shall remain secure during the installation.
After the installation, the equipment, including any associated mounting plate, shall not be
damaged.
Select the mounting method according to your actual situation.
1. According to the datum line on the mounting template, stick the mounting template on the wall or other
surfaces, 1.4 meters higher than the ground.