IAI America CON-TG - Manual (Page 90)

80
6. Operation: Mode Flow Chart
81
6.7 Error List
Errors occurring after the connection of the Teaching Pendant and those occurring after a
controller’s power-on will be displayed.
Press the key.
The Error List screens of PCON, ACON or SCON are comprised of 0 to 16.
The previous 16 alarm-level errors including the last (latest) error will be displayed.
In the case of PCON, ACON or SCON, the alarm list contents will be maintained even
after the power is turned OFF.
The Error List screens of RCP2, RCS, E-Con or RCP2 are comprised of 0 to 8.
The previous 8 alarm-level errors including the last (latest) error and one last-detected error of
the warning level will be displayed.
(Note) The power ON log (no error) displays that the power has been applied to the controller.
No error has occurred.
If you press one of the , , or keys, the mode will change to the mode
of the pressed key.
Errors occurring in the controller will be displayed.
If you press the or key, the Error List
screens can be changed.
Alarm detailed code
(In the case of “0,” - - - - will be displayed.)
On the screen where the error description is
displayed, if you press the
key, Address and
Time will be displayed.
If you press the key, the screen will returnto
the previous screen.
Display Window for Ver. 1.00 and earlier
Display on SCON-CA
(Version V1.10 and later)
PCON-CA and ERC3 PIO Converter
(Version V1.13 and later)
The clock is displayed for SCON-CA, PCON-CA
and ERC3 PIO Converter.
On the display for Version 1.00 and earlier, the time passed since the power is turned
on this time (with no error) is displayed.
On the display of SCON-CA, Version V1.10 and later and PCON-CA, ERC3 PIO Converter
Version 1.13 and later, shows the current time.