Appendix, Parameter (shipment) initialization method – IAI America CON-TG User Manual
Page 107
97
*
Appendix
Appendix
* Appendix
Parameter (Shipment) Initialization Method
Parameters will be changed (initialized) to shipment parameters.
The compatible models are PCON, ACON and SCON.
Caution: Please take note that if parameter (shipment) initialization is performed, user-set
parameters will be changed to shipment parameters.
Caution:
After the next reset or power-on, the parameters will be effective.
Input
for “Adjust No.”and press
the Return key.
The screen will change to the Parameter Init execution
confirmation screen.
Press the
key and press the Return key.
(When not performing parameter initialization, press the
key and press the Return key. The screen will
return to the Mode Select screen,)
The screen will change to the Software Reset screen.
Press the
key and press the Return key.
When the servo is ON, the screen will change to the
Servo OFF confirmation screen.
Press the
key and press the return key.
Parameters will be initialized and become shipment
parameters.
Since the servo is automatically turned OFF, it is not
required to turn SON input OFF.
If software reset has not been executed, parameters have been rewritten to shipment
parameters but operation will not be performed with shipment parameters.