IAI America CON-TG - Manual (Page 19)

9
1.
Safety
Precautions
1. Safety Precautions
8VHDJHQXLQHSURGXFWVSHFL¿HGE\XVIRUZLULQJEHWZHHQWKHDFWXDWRUDQGWKH&RQWUROOHU
(2) Keep out of the operating range of a machine such as an actuator while it is operating or in a
ready state (condition in which the controller’s power is ON). When using it in places where
persons may approach, fence it off.
(3) Before carrying out assembly and adjustment work or maintenance and inspection work of
WKHPDFKLQHEHVXUHWRGLVFRQQHFWWKHSRZHUFRUG:KLOHZRUNLQJGLVSOD\WKHSODWHVSHFL¿HG
as such at an easy-to-read location. In addition, give special consideration to prevent third
parties from turning on the power carelessly by hauling in the power cord to the operator.
Alternatively, lock the power plug or receptacle and direct the operator to keep the key or
prepare a safety plug.
(4) When more than one operator works, advance work by determining the signal method and
checking each other’s safety. Especially, for work associated with axial movement regardless
RISRZHU212))RUPRWRUGULYHQPDQXDORSHUDWLRQEHVXUHWRFRQ¿UPVDIHW\E\FDOOLQJRXW
to other(s) in advance.
(5) When the user (customer) extends wiring, malfunction may occur due to faulty wiring. In this
case, inspect wiring thoroughly and check it for properness before turning on the power.