IAI America CON-TG User Manual
Page 75
65
6.
Operation:
Mode
Flow
Chart
Operation
Screen
Reference
6.
Select “Vel” with the
or
key.
Speed is divided into 3 levels
and can be selected using the
or
key.
With the
key, the speed
will change in the incremental
direction (10%
50%
100%).
With the
key, the speed
will change in the decremental
direction (100%
50%
10%).
(Note) When PCON, ACON or
SCON is connected, the
maximum speed will be the
safety speed set for the
parameter if the MANU
operation mode is set to the
Teach mode 1 (safety speed:
7.
If you press the
key,
movement will be made to the
location of the position No. you
set.
When the servo is not ON,
press the
key to put
into the servo ON status.
8.
When moving towards position
of No. 3 continuously:
Set 3 into the position No. with
the
key.
If you press the
key
continuously, movement will be
made to the location of position
No. 3.
valid).