Netopia CLI 874 - Manual (Page 98)

2-86 Command Line Interface Commands Reference
Wireless Configuration Commands
Note: The commands in this section are suppor ted beginning with Firmware Version 8.2 on wireless (802.11)-
enabled routers.
Wireless Configuration Commands
wireless enable [ yes | no ]
show wireless enable
wireless closed-system [ yes | no ]
show wireless closed-system
wireless ssid string
show wireless ssid
wireless auto-channel [ off | at-startup | continuous ]
no wireless auto-channel
show wireless auto-channel
wireless tx-power [ full | medium | fair | low | minimal ]
show wireless clients
show wireless statistics
wireless default-channel [ no 1..14 ]
show wireless default-channel
wireless wep [ enable | disable ]
show wireless wep
wireless default-keyid [ 1..4 ]
show wireless default-keyid
wireless wep encpt-key [ 1..4 ] hex_string
no wireless wep encpt-key hex_string
show wireless wep encpt-key [ 1..4 ]