Netopia CLI 874 - Manual (Page 30)

2-18 Command Line Interface Commands Reference
Ethernet Interface configuration commands
Ethernet Interface Configuration Commands
interface ethernet id ip address [{ ip-addr/ mask-bits | ip-addr mask | secondary }]
no interface ethernet id ip address [{ ip-addr/mask-bits | ip-addr mask | secondary }]
show interface ethernet id ip address
interface ethernet id ip dhcp client mode { standard | copper-mountain | cmn }
show interface ethernet id ip dhcp client mode
interface ethernet id ip multicast-fwd { yes | no }
no interface ethernet id ip multicast-fwd
show interface ethernet id ip multicast-fwd
interface ethernet id ip igmp-version { v1 | v2 | v3 }
show interface ethernet id ip igmp-version
interface ethernet id mac address { MAC-address | default }
show interface ethernet id mac address
interface ethernet id mode { autonegotiate | 100full | 100half | 10full | 10half |
100full-fixed | 100half-fixed | 10full-fixed | 10half-fixed }
show interface ethernet id mode
interface ethernet id ip nat enable { yes | no }
no interface ethernet id ip nat enable
show interface ethernet id ip nat enable
interface ethernet id ip nat map-list list-tag
no interface ethernet id ip nat map-list
show interface ethernet id ip nat map-list
interface ethernet wan-id ip nat passthrough enable { yes | no }
no interface ethernet id ip nat passthrough enable
show interface ethernet id ip nat passthrough enable
interface ethernet wan-id ip nat passthrough dhcp enable { yes | no }
no interface ethernet wan-id ip nat passthrough dhcp enable
show interface ethernet wan-id ip nat passthrough dhcp enable