Netopia CLI 874 - Manual (Page 146)

3-2 Command Line Interface Commands Reference
Connection Profile Commands
Connection Profile Commands
cp { name | index }
no cp { name | index }
show cp { name | index }
cp { name | index } enable { yes | no }
no cp { name | index } enable
show cp { name | index } enable
cp { name | index } tag string
show cp { name | index } tag
cp { name | index } dle { hdlc | ppp | frame-relay | rfc1483 | atmp | pptp | ipsec | l2tp }
show cp { name | index } dle
cp { name | index } pppoe pppoa-autodetect [ yes | no ]
show cp { name | index } pppoe pppoa-autodetect
Note: The two commands above are suppor ted beginning with firmware release 8.5.
cp { name | index } filterset string
no cp { name | index } filterset [string]
show cp { name | index } filterset
cp { name | index } ip addressing { numbered | unnumbered }
show cp { name | index } ip addressing
cp { name | index } ip address local { ip-addr | ip-addr/mask-bits | ip-addr mask }
no cp { name | index } ip address local
show cp { name | index } ip address local
cp { name | index } ip address remote { ip-addr | ip-addr/mask-bits | ip-addr mask }
no cp { name | index } ip address remote
show cp { name | index } ip address remote
cp { name | index } ip dhcp client mode { standard | copper-mountain | cmn }
show cp { name | index } ip dhcp client mode