Netopia CLI 874 - Manual (Page 65)

Motorola Netopia® Router CLI Commands 2-53
interface sdsl id operation mode { generic | lucent | nokia-eoc-fast | nokia-fixed | paradyne | nortel |
newbridge } [ default ]
show interface sdsl id operation mode
Note: These commands apply only to ATM-based SDSL inter faces.
If the optional default token is included in the command, various WAN inter face parameters will be set to
appropriate default values, given the par ticular mode setting. The parameters and their values are enumerated
in the table below. In addition, the data rates accepted by the interface sdsl id data rate command depend on
what the operation mode is, and correspond to the values available from the Data Rate pop-up menu on the
SDSL Line Configuration screen in the menu console. These acceptable data rates are enumerated below as
well.
Nokia Lucent Paradyne Nortel Newbridge
VPI 0 0 0 0 0
VCI 38 35 35 38 38
RFC 1483
Mode
Routed Routed Routed Routed Routed
Data Rate 384k 784k 784k 1536k 2320
Data Rate
Mode
HUNT LOCKED LOCKED LOCKED LOCKED
Clock Source Network Network Network Network Network
DLE r fc1483 r fc1483 r fc1483 r fc1483 r fc1483
Data Rates
192k
384k
768k
1152k
1536k
144k
160k
192k
208k
272k
384k
400k
416k
528k
768k
784k
1040k
1152k
1168k
1536k
1552k
1568k
2320k
144k
272k
400k
528k
784k
1168k
1552k
2320k
144k
160k
192k
208k
272k
384k
400k
416k
528k
768k
784k
1040k
1152k
1168k
1536k
1552k
1568k
2320k
200K
400k
784k
1168k
1552k
2320k