Netopia CLI 874 - Manual (Page 87)

Motorola Netopia® Router CLI Commands 2-75
ip ntp period value
no ip ntp period
show ip ntp period
Note: These commands are suppor ted beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display the setting of a Network Time Protocol (NTP) ser ver’s NTP
Update Inter val for the router. The value should be entered in HHHH:MM format.
ip ntp servers ip-addr1 ip-addr2
no ip ntp servers
show ip ntp servers
Note: These commands are suppor ted beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display the Host Name or IP Address of a Network Time Protocol
(NTP) ser ver you want to specify for the router. You can also specify an alternate NTP ser ver Host Name or IP
Address, separated by a space.
ip ntp timezone value
no ip ntp timezone
show ip ntp timezone
Note: These commands are suppor ted beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display your time zone. You can specify the time zone as + or -
Greenwich Mean Time (GMT), or as the standard abbreviation of your zone, if it has one.
For example: GMT -8:00 Pacific Standard Time can be entered as pst. The following table shows some standard
time settings.
GMT -10:00 Hawaii Standard Time GMT +3:30 Tehran
GMT -9:00 Alaska Standard Time GMT +4:00 Russia Zone 3
GMT -8:00 Pacific Standard Time GMT +4:30 Kabul
GMT -7:00 Mountain Standard Time GMT +5:00 Russia Zone 4
GMT -6:00 Central Standard Time GMT +5:30 India
GMT -5:00 Eastern Standard Time GMT +6:00 Russia Zone 5
GMT -4:00 Atlantic Standard Time GMT +7:00 Russia Zone 6
GMT -3:30 Newfoundland GMT +8:00 W. Australia Std.
Time
GMT -2:00 Mid-Atlantic Time GMT +9:00 Japan Standard Time
GMT -1:00 Azores Time GMT +9:30 Adelaide, Dar win
GMT +0:00 Greenwich Mean Time GMT +10:00 E. Aust. Std. Time