Netopia CLI 874 User Manual

Page 172

Text mode
Original mode

3-28 Command Line Interface Commands Reference

Note:

The key is a hexadecimal entr y of 16 bytes (32 characters of input) for md5 and 20 bytes (40

characters of input) for sha1. It is not possible to retrieve the encr yption keys or authentication key once they
have been set.

cp { name | index } ipsec encryption key 1234567890123456 [1234567890123456 1234567890123456 ]

This command allows you to specify the authentication key for an IPsec tunnel. You must specify an
authentication key if the authentication type is anything other than None. The key must be an ASCII string of up
to 48 characters for both md5 and sha1.

Note:

For DES the key is one group of 16 hexadecimal characters; for 3DES the key is three groups of 16

hexadecimal characters each.